![](/images/new-backgrounds/1186866/18686671x1.webp)
Appendix E. Rack mount instructions
CrystalView MINI model is not rack mountable.
The optional rack mount kit includes the following items:
nTwo black anodized mounting brackets.
nFour 6 - 32 x 3/8” flat head mounting screws.
To rack mount your CrystalView, attach the two rack mounting brackets to your Unit with the short flange against the Unit using the four screws provided. Do not over tighten the screws used to mount the Unit to the mounting brackets. Use only the hardware provided, using hardware other than that provided could cause damage to the electronics and/or result in loss of mounting integrity. Secure the mounting brackets to the rack using the appropriate size bolts, nuts and lock washers.
The following guidelines should be observed when installing.
a). Do not exceed the operating temperature of 0ο C to 45ο C. b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to prevent instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief for all cables.
e). Provide a grounded power source to all Units. Pay special attention to overall branch circuit load ratings before connecting equipment to this source. Overloaded circuits are potential fire hazards and can cause equipment failures or poor performance.
Appendix F. Rack mount illustration
30
CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL