Rose electronic CrystalView Plus manual Keyboard Commands, Keyboard commands, Key Sequence

KEYBOARD COMMANDS

Keyboard commands

Note: Use only the numeric keys above the keyboard to initiate the keyboard commands from the remote unit.

Do not use the numeric keypad.

Command	Key Sequence
Command Mode	[L-Ctrl] + [L-Shift] + [F10]
Exit Command Mode and save	[ESC]
Exit Command Mode without saving	[L-Shift] + [ESC]
Select Channel 1, 2, 3, or 4	[1] / [2] / [3] / [4]
Select Channel 0	[0] (select all channels)
Reset EQ & Delay values	[L-Ctrl] + [Home]
Next Assisted EQ setting	[L-Ctrl] + [PgUp]
Previous Assisted EQ setting	[L-Ctrl] + [PgDn]
Increase RED delay	[R] + [R-arrow]
Decrease RED delay	[R] + [L-arrow]
Increase Green delay	[G] +[R-arrow]
Decrease Green delay	[G] + [L-arrow]
Increase Blue delay	[B] + [R-arrow]
Decrease Blue delay	[B] + [L-arrow]
Toggle RED delay	[L-Ctrl] + [R]
Toggle GREEN delay	[L-Ctrl] + [G]
Toggle BLUE delay	[L-Ctrl] + [B]
Reset EQ values	[L-Ctrl] + [End]
Increase LF EQ (Course)	[L] + [Up Arrow]
Decrease LF EQ (Course)	[L] + [Dn Arrow]
Increase LF EQ (Fine)	[L] + [R-Arrow]
Decrease LF EQ (Fine)	[L] + [L-Arrow]
Increase HF EQ (Course)	[H] + [Up Arrow]
Decrease HF EQ (Course)	[H] + [Dn Arrow]
Increase HF EQ (Fine)	[H] + [R-Arrow]
Decrease HF EQ (Fine)	[H] + [L-Arrow]
Reset keyboard and mouse	[F1]
Send NULL mouse byte	[F3]
Reset to factory defaults	[L-Ctrl] + [F9]
Toggle Unit Private Mode	[Scroll Lock]

Table 1. Keyboard Commands

NOTE: All keyboard commands are initiated from the Remote unit. Before any keyboard command can be issued, the unit must be in the command mode and a channel selected.

18CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL