Appendix C. Rack mount instructions
The optional rack mount kit includes the following items:
nTwo black anodized mounting brackets or 3 unit mounting shelf.
n6 - 32 x 3/8” flat head mounting screws.
To rack mount a single unit, attach the two rack mounting brackets to your Unit with the short flange against the Unit or mount up to three units on the Rackmount shelf. Do not over tighten the screws used to mount the Unit to the mounting brackets or shelf. Use only the hardware provided, using hardware other than that provided could cause damage to the electronics and/or result in loss of mounting integrity. Secure the mounting brackets or the shelf to the rack using the appropriate size bolts, nuts and lock washers.
The following guidelines should be observed when installing.
a). Do not exceed the operating temperature of 0ο C to 40ο C. b). Do not block power supply vents or restrict airflow.
c). Mechanical loading of the rack should be considered to prevent instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief for all cables.
e). Provide a grounded power source to all Units. Pay special attention to overall branch circuit load ratings before connecting equipment to this source. Overloaded circuits are potential fire hazards and can cause equipment failures or poor performance.
36CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL
