Rose electronic manual Cables, CrystalView Plus Local Unit to CPU cable

CABLES

Cables

CrystalView Plus Local Unit to CPU cable

A CPU adapter cable is used to connect from the Local Unit to a CPUs keyboard, video monitor and mouse ports. The Serial/Audio models use a male-to-male cable configured on both ends with an HD15M VGA connector, two MiniDin-6 connectors for the PS/2 keyboard and mouse, a 3.5mm audio cable, and a DB9MF serial cable.

The dual video model uses a DB25M to HD15M cable. The quad video model use a standard HD15M to HD15M video cable for each additional CPU video output.

Max Local unit to CPU cable length is 20 feet using standard cabling. Using coax cabling, this distance can be extended, but care should be taken because power for the Local unit is obtained from the connected CPUs keyboard port. Extended distances may require the use of an additional power supply for the local unit.

CrystalView Plus Remote Unit to KVM station cable

The keyboard, video monitor, and mouse cables on a KVM station can connect directly to the CrystalView Plus Remote unit or the Dual Local Unit connectors if they are HD15M Video connector and PS/2, MiniDin-6 Keyboard and Mouse connectors.

Stereo speakers and a microphone can connect directly to the remote unit’s audio ports.

The dual and quad video models use a standard HD15M to HD15M video cable for each additional video source.

CrystalView Plus to Rose switch cable

To connect a Local Unit to a Rose switch such as a ServeView Pro, UltraMatrix or UltraView Pro, use Rose cable part number CAB-CX0606Cnnn. (DB25F to HD15/PS2/PS2)

Local Unit to Remote Unit cable

The Local Unit is connected to the Remote Unit with up to 1,000 feet of standard CAT-x UTP/STP “solid core” cable terminated with RJ45 connectors. Rose Electronics cable part number CAB-08UTPnnn.

The dual and quad video models use two or four CAT-x cables from the local unit to the remote unit.

CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL 9