ULTRAVIEW REMOTE 2 INSTALLATION AN D OPERATIONS MANUAL 7
Connecting the Computers / Servers
Connect each computer to the UltraView Remote 2 using th e appropriate CPU adapter cable designed to interfac e to
the type of computer being connected (PS/2, Unix, SUN, DEC , Apple, etc). Connect the DB25M end of the CPU
adapter cable to the desired DB25F CPU port on the rear pa nel of the unit. Connect the other end of the cable to th e
corresponding ports on the computer (keyboard, monitor, and mouse). Refer to Figure 3.
Figure 3. Connecting Computers
Connecting to the network
Connect a network cable from the RJ45 connector on the rear panel of the UltraView Remote 2 and to your network
(See Figure 4)
Figure 4. Connecting to the Network
Network connection
Remote
computer
connections
CPU adapter
cable(s)