ULTRAVIEW REMOTE 2 INSTALLATION AN D OPERATIONS MANUAL 49
Misc
Shared (don’t disconnect other viewers)
This feature is restricted to software server versions of VNC and has no effect on UltraView
Remote 2 unit installations.
Render cursor locally
This feature is restricted to software server versions of VNC and has no effect on UltraView
Remote 2 unit installations.
Fast CopyRect
This feature is restricted to software server versions of VNC and has no effect on UltraView
Remote 2 unit installations.
The following video modes are supported and can be autom atically configured by the UltraView Remote 2. If a
recognised video mode cannot be found, the UltraView Rem ote 2 will gradually change some of the key parameter s
to discover whether a video lock can be achieved. Suppor t for VESA GTF (Generalized Timing Formula) is available
and can be enabled via the Advanced Unit Configuration sc reen.
The half width video modes capture every other pixel. T hese are not generally recommended for normal use but m ay
be used for emergency access to high resolution, high f requency system screens. Half width screens can be
expanded to normal width using the scaling features o f the viewer.
vesa 720 x 400 @ 85Hz
vesa 640 x 480 @ 60Hz
vesa 640 x 480 @ 72Hz
vesa 640 x 480 @ 75Hz
vesa 640 x 480 @ 85Hz
vesa 800 x 600 @ 56Hz
vesa 800 x 600 @ 60Hz
vesa 800 x 600 @ 72Hz
vesa 800 x 600 @ 75Hz
vesa 800 x 600 @ 85Hz
vesa 1024 x 768 @ 60Hz
vesa 1024 x 768 @ 70Hz
vesa 1024 x 768 @ 75Hz
vesa 1024 x 768 @ 85Hz
vesa 1152 x 864 @ 75Hz
vesa 1280 x 960 @ 60Hz
vesa 1280 x 1024 @ 60Hz
vesa 1280 x 1024 @ 75Hz
vesa 1600 x 1200 @ 60Hz
vesa 720 x 400 @ 70Hz*
sun 1152 x 900 @ 66Hz
sun 1152 x 900 @ 76Hz
sun 1280 x 1024 @ 67Hz
apple 640 x 480 @ 67Hz
apple 832 x 624 @ 75Hz
apple 1152 x 870 @ 75Hz
* Not actually a VESA mode but a common DOS/BIOS mode