UNIT CONFIGURATION ULTRAVIEW REMOTE 2 INSTALLATION AN D OPERATIONS MANUAL 9
Configuring the UltraView Remote 2 IP Input module
When you locally connect to the UltraView Remote 2 unit for the first time the Unit and Network must be configured.
Follow the recommended procedure below to configure all m odels:
a. Make all cable connections to the KVM station, networ k, and computers
b. Make sure power is applied to all devices (Computer, Ultra View Remote 2, and Monitor).
c. Make sure a computer is connected to CPU port #1 and that com puter is powered on.
If no computer is connected to port #1, the OSD menu screens may not sync.
d. With power applied, a standard login screen will display o n the KVM monitor
e. Login on to the unit using the default user ID, admin a nd no password
f. After a successful login, the remote computer’s video will displa y on the KVM monitor.
g. Press the CTRL + ALT + C keys simultaneously to displa y the configuration menu options
as shown below: (Unit connection screen may display af ter initial connection is made)
Figure 6. Configuration Menu
Select “Unit Configuration” and the below screen will di splay
Figure 7. Unit Configuration Menu