SAFETY

ULTRAVIEW REMOTE 2 INSTALLATION AN D OPERATIONS MANUAL 39

Safety

This Unit has been tested for conformance to safety regulations and requirements, and has been certified for
international use. Like all electronic equipment, the Uni t should be used with care. To protect yourself from possible
injury and to minimize the risk of damage to this Unit, read and f ollow these safety instructions.
Caution!
Risk of explosion can occur if the battery is replaced with an incorrect type.
Dispose of used batteries according to the manufacturer ’s instructions.
Follow all instructions and warnings marked on this Unit.
Except where explained in this manual, do not attempt to ser vice this Unit yourself.
Do not use this Unit near water.
Assure that the placement of this Unit is on a stable surf ace or rack mounted.
Provide proper ventilation and air circulation.
Keep power cord and connection cables clear of obstructions t hat might cause damage to them.
Use only power cords, power transformer and connection c ables designed for this Unit.
Use only a grounded (three-wire) electrical outlet.
Keep objects that might damage this Unit and liquids that m ay spill, clear from this Unit. Liquids and foreign
objects might come in contact with voltage points that c ould create a risk of fire or electrical shock.
Operate this Unit only when the cover is in place.
Do not use liquid or aerosol cleaners to clean this Unit. Always unplug this Unit from its electrical outlet before
cleaning.
Unplug this Unit from the electrical outlet and refer servici ng to a qualified service center if any of the following
conditions occur:
The power cord or connection cables is damaged or frayed.
The Unit has been exposed to any liquids.
The Unit does not operate normally when all operating ins tructions have been followed.
The Unit has been dropped or the case has been damaged.
The Unit exhibits a distinct change in performance, indic ating a need for service.
Safety and EMC Regulatory Statements
Safety Information
Documentation reference symbol. If the product is m arked with this symbol, refer to the product
documentation to get more information about the produc t.
WARNING A WARNING in the manual denotes a hazard that can caus e injury or death.
CAUTION A CAUTION in the manual denotes a hazard that can dam age equipment.
Do not proceed beyond a WARNING or CAUTION notice unti l you have understood the hazardous conditions and
have taken appropriate steps.
Grounding
These are Safety Class I products and have protective earthi ng terminals. There must be an un-interruptible safety
earth ground from the main power source to the product’s input wiring terminals, power cord, or supplied power cord
set. Whenever it is likely that the protection has been im paired, disconnect the power cord until the ground has been
restored.
Servicing
There are no user-serviceable parts inside these produc ts. Only service-trained personnel must perform any
servicing, maintenance, or repair.
The user may adjust only items mentioned in this manual.