Viewer installation
Install the Viewer on a PC on your network.
Two installation diskettes are provided.
Insert the setup diskette and run setup.
You will be guided through a standard
Click through to specify the installation directory and if you want the associated start menu folder, desktop, and quick launch icons.
Read the readme file for late breaking developments.
Viewer configuration
Viewer operation
H
Configure the Viewer’s IP addresses.
Run the UltraLink Viewer program.
Go to the
Change the IP address to one that was assigned to one of the two UltraLinks. Click OK. This sets up the first UltraLink.
Click on “Add Location” and add the second UltraLink to the Viewer. Enter its correct IP address. This sets up the second UltraLink. Once you click OK, the new location name appears on the UltraLink tool bar.
Click help if you want to know more about the Viewer or proceed below to make a connection.
Make a connection.
Hit the connect icon (second from the left) or click on Connect. A logon box should appear.
Enter the user ID of “admin” and no password.
After a moment, you should see the video attached to the UltraLink.
The
Hit
Don’t forget to go to the
Refer to the manual or Viewer help for further exploration.