1 EM1 Quick Reference Guide
The User remote is used for
day to day operation. It has
basic functions such as:
• Volume Up and Down
and Mute
•Channel Up and Down
•Power On and Off
•Mode Select
Please refer to Section 4,
Using the Remote Control, for
further details.
The intent of the Master remote
is to set up the monitor for
client use. It has all of the
features of the client remote
with the addition of the follow-
ing controls:
•Contrast
•Color
•Bright
•Edit
•Auto Program
Please refer to, Section 4
Using the Remote Control, for
further details.
Page 2
User Remote controller
Master Remote controller
Page 11
4 Using the Remote Control
3 Installing Your EM1
Master Remote Operations
The master remote has all the features of the user remote
plus five set up features. These features include:
•CONTRAST - Contrast has a scale from 0 (lowest
setting) to 16 (highest setting). The factory default is
set at 8. To change the contrast push the CONTRAST
button once. This will display a scale on the bottom
middle of the screen. Use the VOLUME up and down
arrows to select the desired setting.
•COLOR - The color setting has a scale from 0 (lowest
setting) to 16 (highest setting). The factory default
setting is at 8. To change the color, push the COLOR
button once. This will display a scale on the bottom
middle of the screen. Use the VOLUME up and down
arrows to select the desired setting.
•BRIGHT - The brightness setting has a scale from 0
(lowest setting) to 16 (highest setting). The factory
default setting is at 8. To change the brightness push
the BRIGHT button once. This will display a scale on
the bottom middle of the screen. Use the VOLUME
up and down arrows to select the desired setting.
•EDIT - The edit button will allow you to customize your
TV and CATV channel selections. To delete a channel
from one of these modes, select the channel you wish
to delete, push the EDIT button once, then push the
EDIT button once more to confirm selection.
•AUTO PROGRAM - The auto program feature will
automatically detect signal and select them as view-
able channels in the TV and CATV mode. Pushing
the AUTO PROGRAM button once will bring up the
menu. You can choose between STD, IRC, and HRC
cable format by using the CHANNEL up and down
arrows. Once the format has been established, push
the AUTO PROGRAM button once to confirm.