Rosen Entertainment Systems T8

Rosen T8 Owner’s Manual

Note: The internal DVD player can be conﬁ gured for either a

16:9 “Wide” image output or a 4:3 standard image output. Since

the unit has a widescreen display, the DVD player should be

conﬁ gured for “Wide”. For more, see Page 13.

Note: The internal DVD player also has a set of video adjust-

ments, which are separate from the main adjustments. For more

information, please see Page 18.

The system has built-in dome lights. In many vehicles, these built-in

dome lights may replace an original factory dome light which was dis-

placed when the system was installed. The dome lights are controlled

by both the Dome Light button on the front panel and by the matching

Dome Light button on the remote control.

When the lights are off, press either button to turn them on.

When the lights are on, press either button to turn them off.

When the lights have been turned on manually using the Dome Light

button, they will automatically turn off after all the doors are closed.

Note: Some vehicles have a dome light dimming feature that

causes the light to fade out gradually after the doors are closed.

The unit’s dome light may not turn off at the exact speed that the

factory dome lights fade, but it will turn on and off normally when

the doors are opened and closed.

Selecting a display mode: The system’s “widescreen” display has

a 16:9 aspect ratio - wider than a standard television. While many

DVD’s provide widescreen video images that ﬁ t the screen, standard

broadcast TV and many video games don’t.

• To view widescreen DVD’s, press the DISPLAY button on the

system’s remote control until “WIDE” is displayed on the screen.

• To watch “fullscreen” DVD’s, the internal game system, or

broadcast television, select “STANDARD”.

Display adjustments: The display has adjustable video settings. To

change these settings, press the DISPLAY button on the remote con-

trol and hold it for two seconds. The following menu appears:

To select a setting to be changed: Press the DOWN button to move the

cursor down the menu list. After you reach the ﬁ nal setting, pressing

the DISPLAY button again will cause you to exit the menu.

To change the value of a setting: Use the LEFT and RIGHT arrow but-

tons. The range is from 0 to 63.

To exit the menu: Press the DISPLAY button to save settings and exit.

Note: See Page 12 for more on adjusting the Brightness setting.

Dome Light

button