Rosewill RNX-N150HG user manual Installation Guide, Hardware Installation, Software Installation

Wireless High Gain USB Adapter RNX-N150HG User Manual

Chapter 2 Installation Guide

2.1Hardware Installation

There are two ways to install the Adapter:

1.Plug the Adapter directly to the USB port on your computer.

2.Connect the Adapter and your computer through the USB cable attached in package.

)Note:

The promoted Found New Hardware Wizard screen will pop up when the adapter is installed correctly. Click Cancel.

2.2Software Installation

2.2.1 For Windows XP

The Setup steps for Windows 2000 and XP are similar with each other. This user guide takes Windows XP for example.

1.Insert the Resource CD into your CD-ROM drive. To continue, double-click My Computer, and then double-click the CD/DVD drive where the installation CD was placed. Open RNX-N150HGfolder, and double-click Setup.exe. Then you will see Figure 2-1.

Figure 2-1

2.Soon, Figure 2-2will display after a moment. Click Next to continue.

3