Wireless LAN PCI Card | User Manual | |
|
|
|
Configure WPS profiles:
The user can configure WPS profiles with either PIN method or PBC method.
PIN Method:
Step 1: The Registrar enters the pin code generated by station.
Step 2: Push the "PIN" button.
PBC Method:
Push the "PBC" button within 2 second while the Registrar pushes the button.
Manage WPS profiles:
The received WPS profiles are listed in the lower frame, and the listed WPS profile attributes are SSID, MAC address, authentication type, and encryption type.
WPS profile detail information:
Selecting a profile then pushing the "Detail" button brings up the WPS profile.
This profile shows information including:
Connect with WPS profile:
Clicking the "Connect" button will connect to the AP with the selected WPS profile.
Rotate WPS profiles:
If there are more than two WPS profiles, clicking the "Rotate" button will rotate to next profile and connect to AP with this profile. If the connection can't be established successfully, station will perform the WPS profile rotation repeatedly.
Disconnect from WPS AP:
Click the "Disconnect" button to stop the WPS connection.
Delete WPS profile:
Click the "Delete" button to delete the selected WPS profile.
31
