Wireless LAN PCI Card | User Manual | |
|
|
|
Chapter 4 AP mode management guide
This adapter can be configured as AP mode. In order to set this adapter as an AP, please
right click the 
icon on system tray and select “Switch to AP mode”. Please refer to the following introduction to information about this
Note: In Windows® XP, it provides WPA support at hotfix Q815485 However, you have to make sure that hotfix Q815485 (require XP SP1 installed) has been installed in your system before you can start using WPA features. You can check the installation of hotfix in add/remove software page under control panel.
4.1Configuration
This page provides overall configuration to this adapter. Please find the following items for identification to each field.
1.SSID: AP name of user type. User also can select [Use Mac Address] to display it.
2.Wireless Mode: Select wireless mode. 802.11 b/g mix, 802.11b only, 802.11g only, 802.11 b/g/n mix mode are supported. When wireless card is 802.11n, system default is 802.11
32
