Wireless LAN PCI Card | User Manual | |
|
|
|
b/g/n mix; Otherwise system default is 802.11 b/g mix (802.11 b/g/n mix selection item only exists for b/g/n adapter).
3.Country Region Code: eight countries to choose. Country channel list: Classification Range
0:FCC (Canada) CH1 ~ CH11
1:ETSI CH1 ~ CH13
2:SPAIN CH10 ~ CH11
3:FRANCE CH10 ~ CH13
4:MKK CH14 ~ CH14
5:MKKI (TELEC) CH1 ~ CH14
6:ISRAEL CH3 ~ CH9
7:ISRAEL CH5 ~ CH13
4.Wireless Protection: Auto, on, and off. System default is auto.
a. Auto: STA will dynamically change as AP announcement.
b. On: Always send frame with protection.
c. Off: Always send frame without protection.
5.Beacon (ms): The time between two beacons. System default is 100 ms.
6.TX Power: Manually force the AP transmits power. System default is 100%.
7.TX Rate: Manually force the Transmit using selected rate. Default is auto.
8.Idle Time: Manually force the Idle Time using selected value. Default is 300.
9.Channel: Manually force the AP using the channel. System default is channel 1.
10.Use Mac Address: Use MAC address of used wireless card to be AP name. System default is APX (X is last number of Mac Address).
11.Security Setting: Authentication mode and encryption algorithm used within the AP. System default is no authentication and encryption.
12.No forwarding among wireless clients: No beacon among wireless client, clients can share information each other. System default is no forwarding.
13.Hide SSID: Prevent this AP from recognized in wireless network. This is disabled as default.
14.Allow BW40 MHz: Allow BW40 MHz capability.
15.Default: Use system default value.
16.Apply: Apply the above changes.
33
