Wireless LAN PCI Card | User Manual | |
|
|
|
Chapter 2 Installation Guide
2.1Hardware Installation
To install the adapter, follow these steps listed below:
1.Turn off your desktop PC and disconnect the power.
2.Remove your PC case and locate an available PCI slot on the motherboard. Remove the metal slot cover on the back of the PC. Check with your computer manufacturer for instructions if needed.
3.Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot's contacts. Once the adapter is firmly in place, secure its fastening tab to your PC's chassis with a mounting screw. Then, close your PC case.
4.Reconnect your PC’s power and turn on your desktop PC.
2.2Software Installation
Note: The following driver installation guide uses Windows® XP as the presumed operation system. The procedures and screens in Windows® 2000 and Vista are familiar with Windows® XP.
1.After Inserted PCI adapter into your computer. The system should find the newly installed device automatically. Click cancel to close this window.
7
