500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-16-
This button is used to change the network name and password of the local
device. If a new network password is entered, all the devices appeared in
the main panel prior to this are no lon ger present in the new network,
effectively making the local devices not to communicate to the devices which
are in the old logical network. Click Set Local Device Only, the devices
previously set up with the same logical network (same network name)
appears in the device list.
Set All Devices
This button is used to change the logical network of all devices that appear
in the main panel. If these devices whose passwords have been entered for
the same logical network, a dialog box appears, indicating the success of
this operation. For the devices whose passwords are not entered, this
operation will fail and it will report a failure message.
2.2.3 Diagnostics Tab The Diagnostics screen shows the system information and history of all remote
devices appeared over a period of time.
The Upper panel shows technical data concerning software and hardware on
the host computer that are used to communicate through HomePlug on the
powerline network. It includes the following:
Operating system platform/version
Host network name
User name
MAC address of all NICs (Network interface card) connected to the host
Identify versions of all driver DLLs and libraries used (NDIS) and
optionally
HomePlug chipset manufacturer name (Turbo Only devices)
MAC firmware version (Turbo Only devices)
MAC addresses of all devices connected locally to the host
Version of the configuration utility
Vendor name