500Mbps Powerline Gigabit Ethernet Adapter KIT | - | User’s Manual | |
|
|
|
|
discovered in the current logical network. The total number of remote devices connected in the same network is displayed above the remote device panel. Network type (Public or Private) depends on the network status of the local device. Autoscan shows whether the autoscan function is on. The following information is displayed for all the devices that appear in the lower panel.
Device Name
This column shows the default device name, which may be modified. To change the name, click Rename, or click the name and edit it in the list.
MAC Address
This column shows the MAC addresses of the remote devices.
Password
By default, this column is blank. You can click Enter Password to change it. The steps for setting the password of the device (required when creating a private network) are as follows:
Click the device name to select the device in the lower panel.
Click Enter Password. A dialog box appears, showing the device name and password.
Click OK to verify the password. The password field accepts the device
