500Mbps Powerline Gigabit Ethernet Adapter KIT | - | User’s Manual | |
|
|
|
|
3.1 Using the Security Pushbutton
Scenario:
Devices A and B with different NMK (Network Membership Key used to authenticate/access) values are connected to the same powerline. Users want to use them to form a logical network.
Forming a HomePlug AV logical network
Please follow below steps to form a logical network using the Security button:
1.Press the Security button on Device A for less than 3 seconds.
2.Press the Security button on Device B for less than 3 seconds. The button on B must be pressed within 2 minutes
3.Wait for connection to complete.
The Power indicator on both devices will flash evenly at 1 second interval until the operation succeeds or fails. The Power indicator will illuminate steadily on successful completion. If an error occurs, the Power indicator on both devices will flash unevenly for 2 minutes.
3.2 Using the Utility
Scenario:
Devices A and B are located in different networks. Users want to use them to form a logical network.
In this case, using the Security pushbutton cannot pair Devices A and B. Users can only use the Utility to form a logical network.
