500Mbps Powerline Gigabit Ethernet Adapter KIT

- RPLC-500KIT-

User’s Manual

 

 

 

 

and Device C will flash unevenly for 2 minutes.

4.2 Using the Utility

Scenario:

Devices A and B are located in Network N. Device C (the joiner) that is located in another network attempts to join Network N. See

Do as follows to add Device C to Network N using the Utility:

1.Connect Device C to the network card of a PC.

2.Open the Utility. The Main tab page displays information about Device C after connection succeeds.

3.Click the Privacy tab page. Enter a name in the Private Network Name field.

4.Click Set Local Device Only. When the page shown as below displayed, the setting success. Now Device C has been removed from its logical network.

5.Press the pushbutton on Device A or B for less than 3 seconds, making it the „adder‟.

6.Within 2 minutes, press the pushbutton on Device C (the „joiner‟) for less than 3 seconds.

7.Wait for connection to complete.

The Power indicator on Device A (or Device B) and Device C will flash at 1 second intervals until the process succeeds or fails. It will illuminate steadily on success. If an error occurs, the Power indicator on Device A (or Device B) and Device C will flash unevenly for 2 minutes.

-22-

Page 22
Image 22
Rosewill RPLC-500 user manual Device C will flash unevenly for 2 minutes