500Mbps Powerline Gigabit Ethernet Adapter KIT

- RPLC-500KIT-

User’s Manual

 

 

 

 

B with the same Private Network Name as Device A. After the operation success, Devices A and B form a new logical network.

Chapter 4 Joining a Network

This chapter describes how to add a device to an existing HomePlug AV logical network (AVLN) using the Security/Reset pushbutton and using the Utility.

Operation progress and outcome can be monitored by observing the behavior of the power LED.

4.1 Using the Security Pushbutton

Scenario:

Devices A and B are located in network N. Device C (the joiner) that is not located in any networks attempts to join Network N. Any devices on Network N can become the „adder‟.

Joining a network

Please follow below to add Device C to Network N using the Security button:

1.Press the Security button on Device A (or Device B) for less than 3 seconds, making it the „adder‟.

2.Within 2 minutes, press the Security button Device C (the „joiner‟) for less than 3 seconds.

3.Wait for connection to complete.

The Power indicator on Device A (or Device B) and Device C will flash at 1 second intervals until the process succeeds or fails. It will illuminate steadily on success. If an error occurs, the Power indicator on Device A (or Device B)

-21-

Page 21
Image 21
Rosewill RPLC-500 user manual Joining a Network, Joining a network