Only an administrator can access the “ADVANCED SETTING” configuration page.
NOTE: If you cannot log into the configuration page by using default password, please check with the VoIP service provider. The service provider may have provisioned and configured the device for you. The Basic Configuration Page is the first web GUI the user will see.
TABLE 8:
|
|
|
|
|
| End User Password |
| Password to access the Web Configuration Menu. This field is case |
|
|
|
| sensitive with a maximum length of 25 characters. |
|
|
|
|
|
|
|
|
|
|
|
| Web Port |
| By default, HTTP uses port 80. This field is for customizable web port. |
|
|
|
|
|
|
|
|
|
|
|
| IP Address |
| There are two modes to operate the |
|
|
|
| DHCP mode: all the field values for the Static IP mode are not used (even |
|
|
|
| though they are still saved in the Flash memory.) The |
|
|
|
| IP address from the first DHCP server it discovers from the LAN it is |
|
|
|
| connected. |
|
|
|
| Using the PPPoE feature: set the PPPoE account settings. The |
|
|
|
| will establish a PPPoE session if any of the PPPoE fields is set. |
|
|
|
| Static IP mode: configure the IP address, Subnet Mask, Default Router |
|
|
|
| IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. |
|
|
|
| These fields are set to zero by default. |
|
|
|
|
|
|
|
|
|
|
|
| DHCP hostname |
| This option specifies the name of the client. This field is optional but may |
|
|
|
| be required by some Internet Service Providers. Default is blank. |
|
|
|
|
|
|
|
|
|
|
|
| DHCP domain |
| This option specifies the domain name that client should use when |
|
|
|
| resolving hostnames via the Domain Name System. Default is blank. |
|
|
|
|
|
|
|
|
|
|
|
| DHCP vendor class ID |
| Used by clients and servers to exchange |
|
|
|
| Default is blank. |
|
|
|
|
|
|
|
|
|
|
|
| PPPoE account ID |
| PPPoE username. Necessary if ISP requires you to use a PPPoE (Point |
|
|
|
| to Point Protocol over Ethernet) connection. |
|
|
|
|
|
|
|
|
|
|
|
| PPPoE password |
| PPPoE account password. |
|
|
|
|
|
|
|
|
|
|
|
| PPPoE Service Name |
| This field is optional. If your ISP uses a service name for the PPPoE |
|
|
|
| connection, enter the service name here. Default is blank. |
|
|
|
|
|
|
|
|
|
|
|
| Time Zone |
| Controls how the date/time displays according to the specified time zone. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grandstream Networks, Inc. | Page 16 of 28 | |
| Firmware 1.1.0.31 | Last Updated: 1/2009 |
