| NAT Traversal |
| This parameter defines whether the phone NAT traversal mechanism will be |
| |
|
|
| activated or not. If activated (by choosing “Yes”) and a STUN server is also |
| |
|
|
| specified, then the phone will behave according to the STUN client |
| |
|
|
| specification. Under this mode, the embedded STUN client inside the phone |
| |
|
|
| will attempt to detect if and what type of firewall/NAT it is behind by sending |
| |
|
|
| appropriate request to the specified STUN server. |
|
|
|
|
| If this field is set to “Yes” with no specified STUN server, then the phone will |
| |
|
|
| only periodically (every 20 seconds by default) send a blank UDP packet |
| |
|
|
| (with no payload data) to the SIP server to keep the mapped port open on the |
| |
|
|
| NAT. |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| The |
| |
|
|
| order to keep the port open on the router. This parameter defines the interval |
| |
|
|
| time that HT286 send the UDP package. The default setting is 20 second. |
| |
|
|
|
|
|
|
|
|
| |||
| Use NAT IP |
| NAT IP address is used in SIP/SDP message. Default is blank. |
| |
|
|
|
|
|
|
|
|
| |||
| Use STUN |
| Use STUN |
| |
| to detect networks |
| does not yield any response for configured number of times, the device will restart the |
| |
| connectivity |
| TCP/IP stack. If the STUN server does not respond when the device boots up, the |
| |
|
|
| feature is disabled. |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| SIP Extension to notify SIP server that the unit is behind the NAT/Firewall. |
| |
|
|
|
|
|
|
|
|
| |||
| SUBSCRIBE for MWI |
| Default is “No”. When set to “Yes” a SUBSCRIBE for Message Waiting |
| |
|
|
| Indication will be sent periodically |
|
|
|
|
|
|
|
|
|
|
| |||
| Off hook |
| This parameter allows the user to configure a User ID or extension number to |
| |
|
|
| be automatically dialed upon off hook. Please note that only the user part of a |
| |
|
|
| SIP address needs to be entered here. The phone will automatically append |
| |
|
|
| the “@” and the host portion of the corresponding SIP address. |
| |
|
|
|
|
|
|
|
|
| |||
| Enable Call Feature |
| Default is Yes. If set to “Yes”, call features using star codes are supported |
| |
|
|
| locally. |
|
|
|
|
|
|
|
|
|
|
| |||
| Use |
| Conference mode, default option is No. If set to yes, the feature code for |
| |
| conference |
| coference *23 would be disabled. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Disable Call Waiting |
| Default is No. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Disable |
| Default is No. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Send DTMF |
| This parameter specifies the mechanism to transmit DTMF digit. There are 3 |
| |
|
|
| modes supported: in audio which means DTMF is combined in audio signal |
| |
|
|
| (not very reliable with |
| |
|
|
| INFO. |
|
|
|
|
|
|
|
|
|
|
| |||
| DTMF Payload Type |
| This parameter sets the payload type for DTMF using RFC2833 |
| |
|
|
|
|
|
|
|
|
| |||
| Send Flash Event |
| Default is No. If set to yes, flash will be sent as DTMF event. |
| |
|
|
|
|
|
|
|
|
| |||
| Onhook Threshold |
| The amount of time the hookflash is pressed that will cause the device to on |
| |
|
|
| hook. Default is 800ms. |
|
|
|
|
|
|
|
|
|
|
| |||
| FXS Impedance |
| Selects the impedance of the analog telephone connected to the Phone port. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
Grandstream Networks, Inc. | Page 21 of 28 | ||||
|
|
| Firmware 1.1.0.31 | Last Updated: 1/2009 | |
