Rotel RDV-1045 Important Safety Instructions

RDV-1045 DVD Player

Rotel products are designed to comply with international directives on the Restriction

of Hazardous Substances (RoHS) in electrical and electronic equipment and the

disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie

bin symbol indicates compliance and that the products must be appropriately

recycled or processed in accordance with these directives.

Important Safety Instructions

WARNING: There are no user serviceable parts inside. Refer all servicing to qualiﬁed

service personnel.

WARNING: To reduce the risk of ﬁre or electric shock, be sure that the apparatus shall

not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as

vases, shall be placed on the apparatus.

Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture,

or a foreign object gets into the enclosure, immediately disconnect the power cord from the

wall. Take the unit to a qualiﬁed service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component. Keep this manual so you

can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Follow

all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clear-

ance around the unit. Do not place the unit on a bed, sofa, rug, or similar surface

that could block the ventilation slots. If the component is placed in a bookcase or cabinet, there

must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that

produces heat.

The unit must be connected to a power supply only of the type and voltage speciﬁed on the

rear panel of the unit.

Connect the component to the power outlet only with the supplied power supply cable or an exact

equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding

and/or polarization provisions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to

heat, or damaged in any way. Pay particular attention to the power cord at the plug and where

it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left unused for a

long period of time.

Immediately stop using the component and have it inspected and/or serviced by a qualiﬁed

service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Please use Class 2 Wiring when connecting the speaker terminals of the

unit to ensure proper insulation and minimize the risk of electrical shock.

IMPORTANT

FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation

when open and interlock failed or bypassed. Avoid

direct exposure to beam.

3. CAUTION: Do not open the top cover. There are

no user serviceable parts inside the player; leave all

servicing to qualiﬁed service personnel.

WARNING!

To reduce the risk of electrical shock,

ﬁres, etc.:

1. Do not remove screws,

covers or cabinet.

2. Do not expose the unit to rain

or moisture.

3. Do not touch the power cord

or plug with wet hands.

This symbol means that this unit is double insulated. An

earth connection is not required.

Place the unit on a ﬁxed, level surface strong enough

to support its weight. Do not place it on a moveable

cart that could tip over.

VCD

GR PG PL TRTITLE

VRDVD WMA

CHAPPRGMRNDGR ALL TIMER

MP33DPHONICBONUS

B.S.P

PROGRESSIVE

��