Menu Screens LED Indicators Disc Drawer | Rotel RDV-1092 instruction

RDV-1092DVD Audio/Video Player	16
Menu Screens	LED Indicators

Disc Drawer

A number of menu screens can appear dur- ing conﬁguration of the RDV-1092 such as the sample below:

DVD playback	audio track	Dolby Digital 2.0
system setup	camera angle	Dolby Digital 5.1
video setup	subtitle
audio setup	DVD auto play	up/down to select
speaker setup	subtitle pref.	ok to confirm
parental control	audio lang. pref.	left or return to go back
		with no change
high def. setup	audio fmt. pref.	with no change
high def. setup	audio fmt. pref.	menu for help
exit menu		menu for help
exit menu

The menu screens provide access to vari- ous settings and features described in the Conﬁguration section of this manual. The menu system appears when the SETUP but- ton is pressed, typically whether the disc or stopped or playing.

Screen Saver

To prevent damage to a TV monitor during prolonged display of a static image, the unit automatically activates a moving ROTEL logo screen saver display after several minutes.

The screen saver display is turned off, return- ing to the previous display, when any front- panel or remote button is pressed.

Front Panel Overview

The following is a brief overview of the con- trols and features on the front panel of the RDV-1092. Details concerning the use of these controls are provided in subsequent sections of this manual describing various tasks.

POWER Button and LED

The POWER button serves as a master on/off switch. In the out position, the unit is completely powered down and cannot be activated by the remote. Press the button in to activate the unit, indicated by the front panel display be- ing illuminated. With the front panel POWER button in the on position, the remote control ON/OFF buttons are used to activate the unit or put it in standby mode. In standby mode, the POWER LED remains lit, but the front panel display is turned off.

NOTE: Pressing the OPEN/CLOSE or PLAY buttons also turns the unit on when it is in Standby mode.

Two front-panel LEDs provide additional infor- mation during operation of the RDV-1092.

DVD-Audiolights when the disc contains DVD-Audio programming.

HDMI lights when HDMI or HDMI/DVI cables are connected to the RDV-1092.

Front-Panel Display

Alighted display on the front-panel of the RDV-1092 provides information about the status of the unit, activation of special fea- tures, and track/time information. See the illustration at the front of this manual for the location of each section of the display:

Title/Group displays the number of the current Title or Group.

Chapter/Track displays the number of the current Chapter or Track.

Play/Pause shows a play or pause indication.

Status/Disc Type displays the current status of the unit (Open, Close, No Disc, etc.). When a disc is playing, this section of the display shows the sampling rate and format of the disc (DVD-V 48kHz, DVD-A 96kHz, etc.)

Audio Format displays the audio for- mat of the inserted disc (Dolby Digital, DTS, PCM, etc.)

Remain shows the letter R when the remaining time of disc or selection is being displayed.

Time displays the elapsed time when a disc is playing

Function indicates which special fea- tures are activated, A in the ﬁrst segment for angle, Z in the second segment for zoom, and an indicator for the type of repeat in the fourth segment.

Audio Channel shows which of the six possible audio channels are in use. 2/0 in- dicates a stereo signal, 3/2 indicates a ﬁve channels with three front and two surround, 1CH to 6CH for DVD-A discs, etc.