Rotel RDV-1092 Remote Control Batteries, Using the Remote, ON/OFF Buttons, Numeric Buttons

Remote Control Overview

See Figure 2

The RDV-1092 is supplied with an RR-DV98 remote control that duplicates the front-panel functions and provides additional features.

Remote Control Batteries

Three R03(LR03)/AAA size batteries (sup- plied) must be installed before the remote can be used. Remove the cover on the back of the RR-DV98. Install the batteries following the polarity symbols, then replace the cover.

NOTE: Remove the batteries from the remote if it will not be used for a long period of time. Do not leave run down batteries in the remote control; they can leak corrosive chemicals which will damage the unit.

Using the Remote

To use the remote, aim it at the remote sensor on the front-panel of the RDV-1092. The op- eration of the remote sensor can be affected if it is blocked or exposed to bright infrared light. In addition, remote control functions may not work reliably if the batteries in the RR-DV98 are weak.

ON/OFF Buttons

These two buttons provide discrete ON/OFF functions. Press the ON button to activate the RDV-1092 and the OFF button to put the unit in standby mode.

NOTE: The front panel master power button must be pressed in for the remote ON/OFF buttons to work.

OPEN/CLOSE Button

17

STOP Button

Press the STOP button to stop a disc that is playing. If playback is restarted after one press of the button, the disc will resume play- ing from the current position on the disc. Press the button twice to cancel the resume feature. Subsequent play will restart from the beginning of the disc. Playback will also stop when the OFF button on the remote is pressed.

PAUSE Button

Press the PAUSE button to temporarily sus- pend play or to advance the still picture frame by frame after playback is paused.

TRACK Buttons

The TRACK buttons skip forward/ back to the beginning of the next selection.

SEARCH Buttons

During playback, press the SEARCH buttons to begin high-speed play, either for- ward or reverse, at 2X, 4X, 8X, 16X, 30X, or 60X normal speed, increasing with each additional press. Press the PLAY button to resume normal speed playback.

Numeric Buttons

These buttons (1–0 and +10) are used for direct entry of specific Chapters, Titles, and times. Two digit numbers are typically entered by pressing +10 followed by the next digit, as detailed in operating steps.

CURSOR Buttons

Use the four CURSOR buttons to navigate the on-screen display menus.

The left/right CURSOR buttons are also used for Program play mode (CD only).

English

SETUP Button

Press this button to access the Main Menu screen used in the setup of the RDV-1092.

DISPLAY Button

The DISPLAY button changes the time shown in the front panel display and shows a time display in the Status Bar display. Several op- tions are available including elapsed time and remaining time of individual Chapters/Tracks or entire Disc/Titles.

TITLE Button

Press the TITLE button to activate the submenu for the current Title. On some discs, this but- ton will activate the same root menu as the MENU button.

SLOW Button

Press this button to select slow motion play, either forward or reverse, at 1/2, 1/4, or 1/8 normal speed.

The SLOW button is also used to view still pictures on a DVD-Audio disc. Each press of the button advances to the next picture.

GOTO Button

Press the GOTO button for direct selection of a particular Time, Title, or Chapter with the NUMERIC buttons. The first press of the GOTO button allows direct entry of Time. Press the GOTO button a second time for direct entry of a Title number. A third press allows direct entry of a Chapter.

For example, to select Chapter 5, press the GOTO button three times to reach the Chap- ter entry mode. Then press 0 followed by

5.Press the PLAY or ENT button to begin playback at the selected point.

Pressing this button opens or closes the Disc Drawer. If in standby mode, pressing the but- ton activates the unit.

PLAY Button

The PLAY button duplicates the function of the front panel PLAY button and is used to confirm selections in menus. Press this button to start playing the disc from the beginning or to resume play if playback is paused or to return to normal play from any of the slow motion or fast play modes. If in standby mode, pressing the button activates the unit.

ENTER Button

This button (labeled ENT) is used to confirm many selections in operating the RDV-1092. We refer to this button as the ENTER button throughout this manual.

MENU Button

Press the MENU button to activate the menu on the disc.

The MENU button is also used to clear the Program play menu (CD only).

ANGLE Button

Press the ANGLE button to select an alter- nate angle view (if available for the current scene).

NOTE: “Operation not possible” displayed in the status bar indicates that this feature is not available for the current scene.