Rotel RDV-995 owner manual Precautions, Placement, NTSC/PAL Switch

RDV-995DVD Player 6

Precautions

Please read this manual carefully. In addition to basic installation and operating instructions, it provides valuable information on various system configurations as well as general in- formation that will help you get the most from your system. Please contact your authorized Rotel dealer for answers to any questions you might have. In addition, all of us at Rotel wel- come your questions and comments.

Save the RDV-995 shipping carton and all en- closed packing material for future use. Ship- ping or moving the RDV-995 in anything other than the original packing material may re- sult in severe damage.

Placement

Place the RDV-995 on a surface that is level, dry and neither too hot nor too cold (between 5˚C and 35˚C, 41˚F and 95˚F). Do not place the unit where it will be exposed to direct sunlight. Avoid locations that are dusty. Do not place the unit too close to the television set. Do not place the RDV-995 where it will be exposed to vibrations, such as near a sub- woofer. To ensure proper ventilation observe the minimum clearance specifications listed in the safety information on page 2.

Audio/Video Connections

IMPORTANT NOTE

FOR 5.1 CHANNEL OPERATION:

NOTE: Do not plug in the power cable un- til all audio/video signal connections are complete. Do not change any audio/video cable connections until the RDV-995 has been unplugged from the power outlet.

Carefully read the instructions supplied with the component you are going to connect to the RDV-995 to be sure they are compatible. If you have questions, contact your authorized Rotel dealer.

NTSC/PAL Switch

Set the NTSC/PAL switch to the proper set- ting for your TV. Television systems in North America use the NTSC standard. Set the NTSC/PAL switch before the RDV-995 is turned on. It cannot be changed when the unit is on.

Be sure to keep the original sales receipt. It	Before using the RDV-995 in a 5.1 channel
is your best record of the date of purchase,	system see the instructions on page 8 re-
which you will need in the event warranty ser-	garding the correct setting of the Digital
vice is ever required.	Audio Output preferences.

Figure 4: Rear Panel Connections

NOTE: Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may result in unacceptable video quality because many discs are copy-protected.Ê

				Manufactured under license from Dolby Laboratories. "Dolby" and the
				double-D symbol are trademarks of Dolby Laboratories. Confidential
				Unpublished Works. © 1992 - 1997 Dolby Laboratories, Inc. All rights		DVD	PLAYER
				reserved.		MODEL	NO. RDV-995
		VIDEO OUT				POWER CONSUMPTION : 20W
					DIGITAL OUT
ANALOG	Apparatus Claims of	COMPOSITE S VIDEO
OUTPUT					OPTICAL COAXIAL
	U.S. Patent Nos.	Y	PB	PR
	4,631, 603, 4,577,216,				PAL NTSC	EXT REM
	4,819,098, and					IN
	4,907,093 licensed
	for limited viewing
	uses only.
R	L		COMPONENT			PRODUCT COMPLIES WITH DHHS RULES
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO					Manufacured under license from Digital Theater Systems, Inc. US Pat.
CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY					No 5,451,942 and other world wide patents issued and pending. "DTS",	21 CFR SUBCHAPTER J IN EFFECT AT DATE
					"DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.					Copyright 1996 Digital Theater Systems, Inc. All Rights Reserved	OF MANUFACTURE.

CLASS 1

LASER PRODUCT

RP-385

11 12 13 14 15

Audio ANALOG OUTPUT jacks

Left and right channel analog audio outputs.

VIDEO OUT – COMPOSITE jack

Outputs a composite video signal.

VIDEO OUT – S VIDEO jack

Outputs an S-video signal.

COMPONENT VIDEO OUT jacks

NTSC/PAL Output Switch

Switches the video output signal between NTSC and PAL formats.

DIGITAL OUT – OPTICAL jack DIGITAL OUT – COAXIAL jack

Provide digital output signals. The output you use (Optical or Coaxial) must be set in the “Prefer- ence” on-screen menu.

External Remote Input (“Ext Rem In”)

This feature is useful when the unit is installed in a cabinet and the front panel IR sensor is blocked.

AC power cord receptacle

For the power cord connected to the wall out- let.

Outputs component video signals.