Audio Page
The factory default settings of the Audio Page controls are: Digtial Audio
Digital Audio Output
To connect the unit‘s digital output to an ex- ternal device equipped with a digital input, this item must be set correctly.
LANGUAGE | AUDIO | DISPLAY | SYSTEM |
DIGITAL AUDIO OUTPUT | STREAM/PCM | ||
DOWN MIX |
| LT / RT | |
COMPRESSION |
| OFF | |
|
|
| EXIT |
PRESS | KEY |
|
|
•PCM ONLY – When you connect the DIGI- TAL OUT jack of the unit to the linear PCM digital input of other audio equipment.
•STREAM/PCM – When you connect to the digital input of an amplifier to a built- in DTS, Dolby Digital, or MPEG multichannel decoder.
•DOLBY DIGITAL/PCM – When you con- nect to the digital input of a Dolby Digital decoder, or an amplifier with a
The following chart shows the relationship between types of playback discs and output signals.
Playback discs |
| Output |
|
|
|
|
|
| STREAM/PCM | DOLBY DIGITAL/PCM | PCM ONLY |
|
|
|
|
DVD with | ← | ← | |
|
| ||
| PCM |
|
|
|
|
|
|
DVD with | ← | ← | |
|
| ||
PCM | PCM |
|
|
|
|
|
|
DVD with | No output | ← | ← |
linear PCM |
|
|
|
|
|
|
|
DVD with DTS | DTS | No output | ← |
| bitstream |
|
|
|
|
|
|
DVD with Dolby | Dolby Digital | ← | |
Digital | bitstream |
| linear PCM |
|
|
|
|
DVD with MPEG | MPEG | ← | |
audio | bitstream | linear PCM |
|
|
|
|
|
Video CD | ← | ← | |
SVCD |
|
| |
| PCM |
|
|
|
|
|
|
Audio CD | ← | ← | |
|
|
| |
| PCM |
|
|
|
|
|
|
Audio CD with | DTS | ← | ← |
DTS | bitstream |
|
|
22
NOTES:
The unit does not provide the DTS decod- ing function.
When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers.
Never use the unit’s analog output jacks, which output incorrect signals that may damage your speakers.
If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier con- nected to the analog outputs to minimum.
Down Mix
To playback a DVD VIDEO disc recorded with surround multichannel audio correctly, the DOWN MIX setting must be properly made according to your audio system. Note that this setting affects the output signal from the ANALOG output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.
LANGUAGE | AUDIO | DISPLAY | SYSTEM |
DIGITAL AUDIO OUTPUT | STREAM/PCM | ||
DOWN MIX |
| LT / RT | |
COMPRESSION |
| OFF | |
|
|
| EXIT |
PRESS | KEY |
|
|
•LT/RT – When you enjoy multichannel sur- round audio by connecting the unit’s ANA- LOG output to a surround decoder.
•Lo/Ro – When you enjoy conventional 2- channel stereo audio by connecting the unit’s ANALOG output to a stereo amplifier/receiver or television set, or when you duplicate au- dio of a DVD VIDEO disc recorded with sur- round audio to your MD, cassette, etc.
NOTE: The Down mix function does not work when the 3D PHONIC function is ac- tivated.
Compression
You can compress the dynamic range of the sound if needed. Using this function, you can listen to sound at low volumes easily.
LANGUAGE | AUDIO | DISPLAY | SYSTEM |
DIGITAL AUDIO OUTPUT | STREAM/PCM | ||
DOWN MIX |
| LT / RT | |
COMPRESSION |
| OFF | |
|
|
| EXIT |
PRESS | KEY |
|
|
•ON – Audio is played back with the dy- namic range compressed.
•OFF – Audio is played back as it was re- corded.
NOTES:
The Compression function works only when playing back a disc recorded with DOLBY DIGITAL 1CH or 2CH. The setting is not ef- fective for other discs.
The Compression function does not work when the 3D PHONIC function is activated.
Display Page
Monitor Type
You can select the monitor type to match your TV when you playback DVD Video discs re- corded for wide screen televisions.
LANGUAGE | AUDIO | DISPLAY | SYSTEM |
MONITOR TYPE | 4:3 LB | ||
| OFF | ||
SCREEN SAVER |
| ||
| ON | ||
ON SCREEN GUIDE |
| ||
|
| ||
|
|
| EXIT |
PRESS | KEY |
|
|
4:3 LB 
(Letter Box Conversion)
When you connect a normal TV to the unit. When you play a wide picture recorded on a DVD VIDEO
disc, the picture is displayed with bands across the
upper and lower portions of the screen.
