Rotel RKF-100 owner manual Operating Voltage, Safety Instructions

RKF-100Cooling Fan Kit

Thank you so much for your decision to purchase the model RKF-100 Cooling Fan Kit. We take enormous pride in the design and build quality of all of our products and we are confi dent that they will provide you with many years of enjoyable and product will trouble-free service. Should you have any need to call upon our services please feel free to contact us at the address shown at the end of this booklet; or, of course, you can contact the dealership from which you purchased the product. Fill out and send in the owner’s registration card packed with the RKF-100. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is ever required.

Safety Instructions

1.Important Safety Instructions! Please read all the safety and operating instructions shown in this manual before operating this equipment.

2.The lightning flash within an equilateral triangle shown below is intended to alert you to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock.

WARNINGSHOCKHAZARD- DO NOTOPEN

AVISRISQUEDE CHOC ELECTRONIQUE

-NEPAS OUVRIR

3.The exclamation point within an equilateral triangle shown above is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

4.Please retain this manual in a safe place for future reference about safety and operating matters.

5.Adhere to all warnings and follow all operating instructions.

6.Warning: To reduce the risk of fire or electrical shock, do not expose this equipment to rain or moisture.

There are no user serviceable parts inside. Refer servicing to qualified personnel.

7.Caution: To prevent electrical shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

8.For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time, it is recommended that you unplug the unit from the wall outlet. This will prevent damage to the product due to lightning or power line surges.

2

9.Do not use attachments not recommended in this owner’s manual as they may cause hazards.

10.Do not use the equipment near water; for example near a bathtub, washbowl, kitchen sink, a wet basement, swimming pool, etc. This product is meant for indoor use only.

11.Do not place the product on an unstable cart, stand tripod, bracket or table. The equipment is heavy and should it fall, it could cause serious injury to a person and/or serious damage to the equipment.

Caution For Installation

1.The dealership from which you purchased the product is an expert on custom installation procedures and can provide invaluable advice to help you make an aesthetically pleasing and trouble free installation.

Caution For Connections

1.Connect this equipment only to the type of AC power source as marked on the unit. Always route AC power cords so they are not likely to be walked on, or tripped over, or where they may be pinched by items placed on or against them. Always pay particular attention to cords at plugs and/or convenience receptacles, and at the point where they exit from the product.

2.Do not defeat the inherent design features of the polarized plug. Non-polarized line cord adapters will defeat the safety provided by the polarized AC plug. If the plug should fail to fi t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. If you use this product in a country which only has two slotted receptacles in the house, you must use a three-pin adapter plug to earth ground which is the “E” (earth pin) of the power cord connected to this product.

3.Do not overload wall outlets, extension or integral convenience receptacles, as this could result in a risk of fi re or shock.

Operating Voltage

The Fan System is factory-set for 110V, 120V or 230V AC operation at either 50 or 60 Hz, according to the country for which the unit was manufactured (230V in European Union countries, in compliance with CE regulations). The operating voltage cannot be changed by the user and any attempt to do so will void the warranty.

Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.