Rotel RMB-1066 owner manual Specifications, English

9 English

Specifications

Continuous Power Output Stereo Mode	60 watts/ch into 8 ohms
(20-20 kHz, < 0.03% THD)
Continuous Power Output Bridged Mono Mode	150 watts/ch into 8 ohms
(20-20 kHz, < 0.1% THD)
Total Harmonic Distortion	< 0.03%
(20Hz-20kHz, 8 ohms)
Intermodulation Distortion	< 0.03%
(60 Hz : 7 kHz, 4:1)
Frequency Response (± 1 dB)	15Hz–100kHz
Damping Factor (20-20,000 Hz, 8 ohms)	150
Speaker Impedance (combined load)
Stereo mode:	4 ohms minimum
Bridged Mono mode:	8 ohms minimum
Signal to Noise Ratio (IHF A network)	116 dB
Input Impedance	22 k ohms
Input Sensitivity	1.5 volt
Auto Turn On Threshold Level (if activated)	10 mV input signal
Auto Turn Off Delay Time (if activated)	5 minutes with no signal
Power Requirements
USA:	115 Volts, 60 Hz
Europe:	230 Volts, 50 Hz
Power Consumption	700 Watts
Dimensions (W x H x D)	430 x 121 x 435 mm
	1615/16 x 43/4 x 171/8 in
Weight (net)	13.5 kg, 29.75 lb.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.