Royal Sovereign RSL-2702 Introduction, Safety Precautions, Topic, Threading Film, 11-12, Page

TABLE OF CONTENTS

TOPIC			PAGE
1.	Introduction		2
2.	Safety Precautions		2
3.	Included with Laminator		3
4.	Product Identification		3
5.	Loading Film		4
6.	Threading Film
	6.1. Hot Film		5-6
	6.2. Cold Film		7
	6.3. Mounting		8
7.	Control of Roller Pressure		9
8.	Control Panel		10
9.	Laminating Steps
	9.1. Hot Laminating		11-12
	9.2. Cold Laminating		13
10.		Using Cross Cutter	14
11.		Maintenance	15
12.		Troubleshooting	16
13. Recommended Temperature and Speed Settings			17
14.		Specifications	18
15.		Warranty	19

RSL-2702

1. INTRODUCTION

Thank you for choosing a Royal Sovereign laminator. It has been designed and manufactured to provide years of continuous service. For complete operating and maintenance information please read this manual thoroughly. Upon receipt of your laminator, please inspect the box, the machine and all other contents for shipping damage. Damage should be brought to the immediate attention of the delivering carrier (See page 3 for list of shipment elements).

2. SAFETY PRECAUTIONS

Failure to comply with any of the following safety procedures could result in serious injury. Please read the instructions carefully and keep for future reference.

1.Only a licensed electrician should install wiring and outlet for the laminator.

2.Ensure the unit is plugged into a properly grounded outlet with the correct voltage.

3.Keep hands and clothing (i.e. Neckties) away from rollers.The rollers have pinch points that can trap body parts or clothing and cause serious injury.

4.Keep flammable and wet objects away from the machine.

5.Place machine on a level surface.

6.Avoid excessive sunlight, humidity and extreme temperatures.

7.Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving and/or repairing.

8.Keep out of reach of children.

9.Only Royal Sovereign authorized maintenance and service technicians should make repairs.

10.Do not attempt to laminate items that exceed total recommended material thickness for the unit

11.When cleaning the machine, don't use flammable sprays or materials.

12.Do not touch the rollers when they are hot or place foreign objects inside the machine.

13.Do not cover the surface of the machine until the machine has completely cooled.

1 2