***Useful Information***
1.It would be easier for you to operate the machine next time if the tempreature and the speed are set at the best condition and memorized by using the MEMORY button
2. 
sign may appear on LCD window in the case continuous laminating.
If it happens, the speed needs to be lowered by one speed level and started again
after 
signal on the LCD window.
3.In case of wrinkling or rolling of film due to wrong position of document, the button of 
REV 
is needed to be keeping pushed in order that document could come out to the front with buzzer sound.
4.When document is much smaller than film, you should place it in the middle of film for preventing wrinkle.
5.Use cooling fan when you laminate continuously without break and document is too hot.
***Laminating Speed at each level***
SPEED 1 | 1.0m(3.3ft) |
SPEED 2 | 1.6m(5.2ft) |
SPEED 3 | 2.0m(6.6ft) |
SPEED 4 | 2.2m(7.2ft) |
SPEED 5 | 2.6m(8.5ft) |
SPEED 6 | 3.3m(10.8ft) |
SPEED 7 | 4.3m(14.1ft) |
SPEED 8 | 5.2m(17.1ft) |
SPEED 9 | 6.0m(19.7ft) |
The above laminating speed numbers are at the condition on regular voltage with almost no film tension. There might be the possibility for difference to the above numbers due to the change of voltage or adjustment of tension.
- 19 -
