Manuals / RuggedCom / Computer Equipment / Switch

RuggedCom RS969 DC And AC power supply wiring examples,  2008 RuggedCom Inc. All rights reserved

Models: RS969

1 31

Download 31 pages 20.22 Kb

Page 15

Figure 3: DC And AC power supply wiring examples

NOTES:

1.88-300VDC rated equipment: A 300VDC appropriately rated circuit breaker must be installed within 3m of unit.

2.A circuit breaker is not required for 12, 24 or 48 VDC rated power supplies.

3.Separate circuit breakers must be installed and separately identified.

4.Equipment must be installed according to the applicable country wiring codes.

	15
 2008 RuggedCom Inc. All rights reserved	Rev104

Image 15

RuggedCom RS969 manual DC And AC power supply wiring examples,  2008 RuggedCom Inc. All rights reserved, Rev104

Contents

Installation Guide RuggedSwitch RS969Federal Communications Commission Radio Frequency Interference StatementTrademarks Table of Contents RuggedRated for Reliability in Harsh Environments 1 Product OverviewUniversal Power Supply Options Ethernet PortsFigure 1.1.1 RS969-M12 with Mini-Change Power Connector 1.1 RS969 Family Ports/Connectors DescriptionComments Figure 1.1.2 RS969-RJ45 with M23 Power ConnectorAlarm condition exists ActivityMounting Bracket Release Latch 2 Installation2.1 DIN Rail Mounting Rail2.2 Ingress Protection IP67 C h a s s i s G r o u n d 2.3 Power Supply Wiring and Grounding2.3.1 Power Supply Input Connectors Description S u r g e G r o u n dinputs. This terminal 3 is connected to chassis ground NeutralTerminal # 2.3.2 Single AC Power Supply Wiring Examples 2.3.3 Single DC Power Supply Wiring Examples 2.3.4 Dual Power Supplies - DC and AC Inputs  2008 RuggedCom Inc. All rights reservedRev104 Figure 3 DC And AC power supply wiring examples  2008 RuggedCom Inc. All rights reservedRev104 Surge Ground Chassis Ground 2.4 Dielectric Strength Testing2.5 Failsafe Alarm Relay Wiring and Specifications Normal Contact state without power being applied to unit1. Normally closed 2. Common 3. Normally open 2.6 Console Port Wiring Signal 2.7 Fast Ethernet Ports - Signal DescriptionOperating Environment Technical SpecificationsPower Supply Specifications 3.3 Failsafe Relay SpecificationsData Port 3.4 Twisted Pair Data Port Specifications3.5 Fiber Optical Port Specifications Connector Type RJ45 or M123.6 IEC 61850-3 Type Tests 3.8 IEC Environmental Type Tests 3.7 IEEE 1613 Type Tests3.9 Mechanical Specifications  2008 RuggedCom Inc. All rights reservedRev104 Enclosure DimensionsLength x Width x Depth 196,85 x 177,8 x 108,7 mm3.10 Agency Approvals 4 Accessories 4.1 POWER 1/unit4.2 CONSOLE 1/unit M12 FailSafe Port Mating Cable 4.3 FAILSAFE 1/unitM12 Console Port Mating Connector M12 FailSafe Port Mating Connector4.4 ETHERNET 8/unit 4.5 LC FIBER OPTIC 2/unit 5 Warranty RuggedCom Inc 30 Whitmore Road Woodbridge, Ontario Canada L4L 7Z4Tel 905 Fax 905 Toll Free 888