RuggedCom RX1512 manual Ieee 1613 C37.90.x EMI Immunity Type Testsa, Test Description Test Levels

5. EMI And Environmental Type Tests

Test		Description		Test Levels
IEEE C37.90.3	ESD		Enclosure Contact	+/-2kV, +/-4kV, +/- 8kV
			Enclosure Air	+/-4kV, +/-8kV, +/-15kV
IEEE C37.90.2	Radiated RFI		Enclosure ports	35 V/m
			Signal ports	+/- 4kV @ 2.5kHz
IEEE C37.90.1	Fast Transient		D.C. Power ports	+/- 4kV
			Earth ground ports	+/- 4kV
IEEE C37.90.1	Oscillatory		Signal ports	2.5kV common mode @1MHz
			D.C. Power ports	2.5kV common, 1kV diff. mode@1MHz
IEEE C37.90	H.V. Impulse		Signal ports	5kV (Fail-Safe Relay output)
			D.C. Power ports	5kV
IEEE C37.90	Dielectric Strength		Signal ports	2kVAC
			D.C. Power ports	2kVDC

aMeets Class 2 requirements for an all-fiber configuration. Meets Class 1 requirements for copper ports.

Table 5.2. IEEE 1613 (C37.90.x) EMI Immunity Type Testsa

Test	Description		Test Levels
IEC 60068-2-1	Cold Temperature	Test Ad	-40°C, 16 Hours
IEC 60068-2-2	Dry Heat	Test Bd	+85°C, 16 Hours
IEC 60068-2-30	Humidity (Damp Heat, Cyclic)	Test Db	95% (non-condensing), 55°C , 6 cycles
IEC 60255-21-1	Vibration		2g @ (10 - 150) Hz
IEC 60255-21-2	Shock		30g @ 11mS

Table 5.3. Environmental Type Tests

RuggedCom® RuggedBackbone™ 41 RX1512 Installation Guide Rev 105