Appendix A. Connector and Cable Pinouts

A.2. Console Cable Pinouts

In normal operation, the console connector should remain closed and should only be used by an authorized technician.

The console connection is a 3-pin female connector, based on the RS-232 serial standard. The port provides a standard terminal connection through which a technician can configure and monitor the base station through its command line interface (CLI).

Cable type: 3 wire 28AWG

Cable connectors: DB9F, proprietary 3 pin console connector

Cable length: 2m

The cable is supplied by RuggedCom.

Figure A.2. WiN7000 Console Connector Pinout

Pin Number

Type

1

TX

 

 

2

RX

 

 

3

GND

 

 

Table A.2. WiN7000 Console Connector Pinout

RuggedCom® RuggedMAX WiN7000

30

Installation Guide Rev1

Page 30
Image 30
RuggedCom WIN7000 manual Console Cable Pinouts, Figure A.2. WiN7000 Console Connector Pinout