You must enter a passcode to access the Save ISF | Runco LS-7

You must enter a passcode to access the Save ISF

Operation

Memory: Select Memory from the Main menu, then press ENTER to recall image quality settings previously saved, or to save changed settings in any of four memory locations.

•Recall Memory: Select Recall Memory from the Memory menu to recall saved image quality settings. Unless you select Default (see below), this control affects all sources, not just the active source.

•User Memory 1 and User Memory 2 contain the factory default settings when the projector is initially turned on.

•When you recall the ISF Day or ISF Night memory settings, all settings associated with these stored values are grayed out. This prevents unintended adjustments from being made. To remove this restriction, choose User Memory 1 or User Memory 2.

ISF Day and ISF Night are grayed out unless these custom settings have already been saved.

•Choose Default to restore the factory-default settings for the active source only. The other sources are unaffected.

•Save Settings: Select Save Settings from the Memory menu to save any image-related settings you have changed to User Memory 1 or User Memory 2.

The following items are saved (for all sources, not just the active source):

•Brightness / Contrast

•Color / Color Tint

•Sharpness (all settings in sub-menu)

•Noise Reduction (all settings in sub-menu)

•Color Space

•Video Standard

•Gamma

•Color Temperature

•DLP Frame Rate

•Color Gamut

•ConstantContrast

•Adaptive Contrast

•RGB Adjust (all settings in sub-menu)

•Lamp Power

•Save ISF: Select Save ISF from the Memory menu to save any image-related settings you have changed to the ISF Day or ISF Night memory location.

You must enter a passcode to access the Save ISF

Note sub-menu.

The settings that are saved are the same as those saved with the Save Settings command (see above).

Runco LS-7 Installation/Operation Manual

39

Image 55

Runco LS-7 operation manual You must enter a passcode to access the Save ISF, Note sub-menu

Contents

Home Theater Projector LS-7Page Length of Warranty RuncoCare Standard Two Year Limited WarrantyRuncoCare Standard Features Warranty Coverage Warranty Exclusions RuncoCare Claim Procedure Online Product Registration Extended Service OptionsLimitation of Implied Warranties Effect of Local Law Exclusion of DamagesCOPYRIGHT AND TRADEMARKS Important Safety Instructions DECLARATION OF CONFORMITY Compliance Information IMPORTANT RECYCLE INSTRUCTIONS FCC PARTINDUSTRY CANADA ICES-003 PRODUCT DISPOSALPage RuncoCare Standard Two Year Limited Warranty Table of Contentsviii Floor Mounting Upright RS-232Error Codes Serial Command SyntaxKey Commands Operations Commands Table of Contents List of Figures List of Figures If You Have Comments 1. Introduction1.1 About This Manual Target Audience DANGER 1.2 Using This Manual Optional Accessories 1.3 Description, Features and BenefitsKey Features and Benefits Parts List Introduction MENU 2. Controls and Functions2.1 LS-7at a Glance SOURCE FRONT IR SENSOR EXHAUST VENTINTAKE VENT PROJECTION LENS 3.LAMP MODULE COVER 6.ADJUSTABLE FEETFigure 2-2. LS-7Rear/Bottom/Top View 1.RUNCO LOGO BADGE 2.REAR COVER 1.HDMI 1 Digital HDMI 2 Digital 5.COMPONENT 1/SCART RCA connectors2.2 LS-7Rear Panel Figure 2-3. LS-7Rear Panel 9.TRIGGER 2 3.5-mm,mini phono jack 2.3 LS-7Remote Control7.S-VIDEO 8.IR INPUT 5.Aspect Ratio Selection Button 7.Memory Preset Buttons M1 / M2 / M38.Picture Adjustment Buttons Contrast Sharpness SHARP Press to adjust sharpness Notes on Batteries 3. Installation3.1 Remote Control Notes on Remote Control Installation Figure 3-1.IR Reception Angles90.0 Table 3-1.Installation Overview 3.2 Quick SetupInstallation Considerations InstallationTable 3-2.Projector Installation Options Installation Type Estimating Throw Distance Ambient LightThrow Distance Figure 3-2.Estimating Throw Distance Vertical and Horizontal Floor InstallationFigure 3-3.Projector Placement Table 3-3.Throw Ratios for the LS-7Series Figure 3-4.Vertical Lens Shift Example Only Lens Shift Installation Figure 3-5.Horizontal Lens Shift Example Only Figure 3-6.Folded Optics Adjusting the Projection3.4 Mounting the LS-7 Folded Optics 3.5 Connections to the LS-7 Figure 3-7.HDMI/DVI Source Connections Connecting SourceComponents to the LS-7 HDMI/DVI Connections See Figure Figure 3-8.RGB Connections Y Pb Pr Y Pb Pr DTV Set-TopBox or Other Component YPbPr SourceFigure 3-9.Component Video Connections Installation Installation Figure 3-10.Composite and S-VideoConnectionsDVD Player, VCR Satellite Receiver Laser Disc etc Figure 3-11. RS-232Control System Connection to Automation/ Control System or PCRS-232Controller Connection Theater Equipment Connecting 12-VoltConnecting an External IR Trigger Output to External Connecting to AC Power 3.6 Turning on the Power 3.7 Lens AdjustmentsFocus Zoom Lens Shift Installation 3.8 Changing the OSD Languageshift exceeds 50 per cent of the screen height Rear Projection Ceiling Mode 3.9 Adjusting the Picture Orientation Installation 4.3 Selecting An Input Source 4. Operation4.1 Selecting Video Memory 4.2 Selecting an Aspect Ratio separated by their display modes 4.4 Using Picture-In-PicturePIP 4.5 Using the On-ScreenMenus Figure 4-1. LS-7OSD Menu Structure ServiceMain Advanced Figure 4-2. LS-7Main Menu Main Table 4-2.Aspect Ratio Settings Operation Table 4-2.Aspect Ratio Settings continued Operation Table 4-2.Aspect Ratio Settings continuedAspect Note sub-menu You must enter a passcode to access the Save ISF Below Black Above Black Operation Operation Figure 4-6.Overscan Examples Operation Figure 4-7. Source Select Sub-Menu Figure 4-8. LS-7 Advanced Menu Advanced Standard for your region Table 4-3.x/y Color Gamut Values Offset settings reduce the image brightness Figure 4-9. RGB Adjust Sub-Menu Operation Figure 4-10. Fine Sync Sub-Menu Operation Figure 4-11. LS-7 System Menu System Figure 4-12. Source Enable Sub-Menu DMD Area Figure 4-13.PIP and PBP areas for 720p DisplayPBP1 PBP2 Operation Figure 4-14.PIP Split-ScreenMode Figure 4-15. LS-7 Control Menu Control Trigger 2 operates identically to Trigger Operation Language Figure 4-16. LS-7 Service Menu Lamp Hours User Memory 1 / User Memory ISF Day ENTER Operation 5.1 Lamp Replacement 5. Maintenance and Troubleshooting Table 5-1.Troubleshooting Chart 5.2 Troubleshooting TipsMaintenance and Troubleshooting Maintenance and Troubleshooting Table 5-1.Troubleshooting Chart continued Maintenance and Troubleshooting 6. Serial Communications 6.1 RS-232Connection and Port ConfigurationSerial Command Syntax Key Commands Table 6-1.Serial Command Key Names and IR Codes gam.crt Precede operation and command with a space op operation command CRThe command type can be one of 5 functions Table 6-2.Serial Commands Table 6-2.Serial Commands continued source.sel Table 6-2.Serial Commands continued ccont Table 6-2.Serial Commands continued blank.screen Table 6-2.Serial Commands continued act.source Table 6-2.Serial Commands continued status Table 6-2.Serial Commands continued Description Table 6-3. RS-232Error CodesError Code LED Indication Specifications 7. SpecificationsLS-7Specifications Table 7-1. LS-7Specifications Specifications Table 7-1. LS-7Specifications continued Specifications Table 7-1. LS-7Specifications continuedGeneral 100 7.2 LS-7DimensionsFigure 7-1. LS-7Dimensions Specifications 7.3 Supported Timings Table 7-2.Supported Signal Timings by InputSpecifications PAL-60 SpecificationsPAL-B/G PAL-MPage 020-1038-00Rev. A December