Ryobi manual Ryobi 3/8 in mm DRILL-DRIVER Model NO. D45CK

RYOBI 3/8 in. (10 mm) DRILL-DRIVER – MODEL NO. D45CK

The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your DRILL-DRIVERor when ordering parts.

SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS

SEE NOTE

PARTS LIST

Key No.	Part No.	Description	Quan.
1	6612001	Chuck Screw	1
2	940214077	Data Plate	1
3	940185030	Logo Plate	1
4	690032011	3/8 in. (10 mm) Chuck	1
	983000-473	Operator’s Manual

NOTE: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest authorized service center.

15