BATTERY REMOVAL
DISPOSAL OF EXHAUSTED BATTERIES
|
| CYC |
|
|
|
| To preserve natural resources, please | |
| E | L |
|
|
| |||
R |
|
| E |
|
| recycle or dispose of batteries properly. | ||
R B R C |
|
|
| |||||
|
|
|
|
| This product contains | |||
|
|
|
|
|
|
|
| |
1 |
| N i | C d |
|
| 7 | battery. Local, state, or federal laws may | |
. |
|
| 3 | prohibit disposal of | ||||
8 |
|
|
|
|
|
| ||
|
|
|
| 8 |
| |||
0 |
|
|
|
|
| |||
| 0. . |
|
|
| ||||
|
| 8 | 22 | 8 |
|
| batteries in ordinary trash. | |
|
|
|
|
|
| |||
Consult your local waste authority for information regarding available recycling and/or disposal options.
For more information on battery recycling call
BATTERY.
WARNING:
Do not attempt to disassemble batteries. Fire or injury may result.
BATTERY REMOVAL, PREPARATION FOR RECYCLING MODEL HP62
See Figures 17 and 18.
TO REMOVE:
■Lock switch trigger by placing the forward/reverse switch in center position. See Figure 4.
■Remove battery cover from bottom of drill handle by depressing and pushing cover in the direction of the arrow as shown in figure 17.
■Slide battery assembly from drill handle enough to expose leads and battery terminals. See Figure 18. Disconnect leads from battery terminals.
Note: Be careful not to break battery terminals when disconnecting leads.
WARNING:
Upon removal, cover the battery assemblies terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery assembly or remove any of its components. Also, never touch both terminals with metal objects and/or body parts, as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.
MODEL HP62
DRILL
HANDLE
TO
REMOVE COVER
BATTERY |
|
COVER | Fig. 17 |
MODEL HP62
DRILL
HANDLE
BATTERY
LEAD
BATTERY
LEAD
BATTERIES | Fig. 18 |
SAVE THESE INSTRUCTIONS
Page 16
