FEATURES
CARRYING HANDLE
See Figure 2.
For convenience when carrying or transporting the miter saw from one place to another, a carrying handle has been provided on top of the saw arm. To transport, turn off and unplug the saw, then lower the saw arm and lock it in the down position. Lock saw arm by depressing the lock pin.
MITER TABLE CLAMP
See Figure 3.
The miter table clamp securely locks the saw at desired miter angles.
SPINDLE LOCK BUTTON
See Figure 4.
A spindle lock button has been provided for locking the spindle which keeps the blade in the saw from rotating. Depress and hold the lock button while installing, changing, or removing blade.
SWITCH LOCK
See Figure 5.
The switch trigger is equipped with a switch lock to reduce the possibility of accidental starting.
To release switch lock feature:
nDepress the switch lock (1).
�n While holding switch lock pushed in, depress the switch trigger (2).
�n Release the switch lock (3).
nNOTE: The spring loaded lock will spring back into the switch lock position when switch trigger is released.
CARRYING
HANDLE
|
| 30 |
|
| 1 |
|
| 5 |
� � |
|
|
���� | � � |
|
|
| |
| ����� | � � |
|
|
SAW ARM LOCKED | LOCK PIN |
| |
IN DOWN POSITION | Fig. 2 |
|
SAW ARM
30 1 5
UNLOCK
LOCK
3 |
|
0 |
|
1 |
|
5 |
|
| MITER TABLE |
| CLAMP |
| (IN LOCKED |
| POSITION) |
LOCK PIN | Fig. 3 |
SPINDLE LOCK |
|
BUTTON |
|
3
0
22
. 5
1 5
0
15
22.5 | 3 0 |
|
|
| 31.62 |
| |
|
| 4 5 |
Fig. 4
SWITCH
LOCK
1 
2 3 
3
0
22
. 5
1 5
0
15
| 22.5 | 3 0 |
|
|
|
| 31.62 |
| |
SWITCH |
|
| 4 5 | |
TRIGGER |
|
|
|
|
Fig. 5
10
