OPERATION

TO CHECK, REPLACE OR ADJUST THE BLADE GUARD ASSEMBLY

See Figures 23 - 24.

The riving knife is mounted between several shims that can be relocated as needed to center the knife behind the blade. It is held in place by two bolts and hex nuts at its base. The bolts are set in slots that permit front-to-back adjustment.

WARNING:

Failure to turn the table saw off, remove the switch key, and unplug the saw before servicing or working on it could result in accidental starting causing possible serious injury.

RIVING

KNIFE

SHIMS

HEX NUTS

MOUNTING

PLATE

￿ Lower the blade.

￿ Remove the throat plate.

￿ Raise the blade by turning the blade adjusting handle

counterclockwise or lower it by turning the handle

 

clockwise.

Fig. 23

￿ With blade guard up, make sure the riving knife is placed

 

at least 1/8 in. from the outer points of the blade. Then

 

make sure it is centered within the width of the blade. If

RIVING KNIFE

either placement is wrong, adjust with the following steps.

 

￿ Put the saw in angle mode by moving the bevel locking

 

lever to the right. Slowly turn the bevel handle until the

BLADE

bevel indicator is at a 30˚ angle. Lock the bevel locking

 

lever securely while holding the bevel handle in place.

1/8 INCH

￿ With the box end of the small hex key, remove the two

 

nuts at the base of the riving knife. Remove the riving

 

knife/guard assembly.

 

￿ Rearrange the riving knife between the shims to achieve

 

the correct centering.

 

WARNING:

Properly align riving knife. Improperly aligned riving knife

 

can cause blade to bind which will increase risk of

Fig. 24

kickback.

￿Adjust the riving knife on the bolts front-to-back as needed to place the riving knife approximately 1/8 in. from the blade’s outer points. Put the nuts back on and tighten.

￿Bring the blade back to the desired angle and height. Lower the blade, insert the throat plate, then securely tighten the throat plate screw.

Page 23

Page 23
Image 23
Ryobi Table Saw manual To CHECK, Replace or Adjust the Blade Guard Assembly, Riving Knife Shims HEX Nuts, Inch

Table Saw specifications

The Ryobi Table Saw is a powerful and versatile tool designed for both hobbyists and professional woodworkers. Known for its durability and efficiency, this table saw is an essential addition to any workshop. One of its standout features is the high-performance motor, which typically operates at 15 amps, delivering ample power to handle a variety of cutting tasks with ease. This ensures that it can cut through hardwood, softwood, and even plywood without bogging down.

A notable characteristic of the Ryobi Table Saw is its precision. Equipped with a robust aluminum table, the saw offers a flat, sturdy surface that promotes accurate cuts. The table is typically expansive, allowing users to work on larger materials without difficulty. With the inclusion of rack and pinion fence system, users can make quick adjustments to the blade position, ensuring that each cut is clean and precise. The fence system is user-friendly, allowing for smooth adjustments with minimal effort.

Safety is a top priority in Ryobi's design, and this is reflected in various features like the blade guard and anti-kickback pawls. The blade guard provides visibility of the cut line while protecting the user from potential injury. Additionally, the saw often includes a push stick, which helps maintain a safe distance from the blade during operation.

Another key technology found in the Ryobi Table Saw is its portability. Many models are designed to be lightweight and feature wheels, making it easy to move the saw from one location to another. This is particularly advantageous for contractors or those who have limited workshop space.

Dust collection is also an important aspect of woodworking, and the Ryobi Table Saw typically includes a built-in dust port. This enables users to connect a shop vac or dust collector, minimizing the mess and ensuring a cleaner work environment.

In summary, the Ryobi Table Saw integrates powerful performance with user-friendly features. Its precision cutting capabilities, safety mechanisms, and portability make it an excellent tool for anyone looking to tackle woodworking projects. Whether you're a seasoned professional or a DIY enthusiast, the Ryobi Table Saw can elevate your craftsmanship and improve your woodworking efficiency.