Manuals / Ryobi / Power Tools / Saw

Ryobi Table Saw manual To Remove the Blade, Blade Throatguard Plate, Rotate Blade Adjusting

Models: Table Saw

1 34
Download 34 pages 63.05 Kb
Page 22
Image 22

OPERATION

SETTINGS AND ADJUSTMENTS

TO REMOVE THE BLADE

See Figures 20 - 22.

Use the two wrenches supplied with the saw in this proce- dure to replace the blade.

WARNING:

Unplug your saw and make sure the blade guard assembly is installed and working properly to avoid serious personal injury.

￿Raise the blade guard.

￿Remove the screw from the throat plate then remove the throat plate.

￿Raise the blade to its full height by turning the blade adjusting handle clockwise.

￿Place the open end of the small hex wrench into the slot beside the blade. The wrench will fit over two flats on the arbor (blade shaft). See Figure 21.

￿Fit the large hex wrench onto the arbor nut. Turn clockwise and remove the nut, taking care not to drag your knuckles across the blade.

Note: The arbor nut has right-hand threads.

￿Remove the outer blade washer from the arbor and then remove the blade. Make sure that inner blade washer and both spacers are tight against arbor shoulder.

￿Replace with a new blade. Make sure the blade teeth are pointing forward, toward incoming work.

￿Put the outer blade washer and arbor nut back on, aligning with the flats on the arbor. Tighten the nut with a clockwise turn.

Note: Use care not to cross thread arbor nut. Do not overtighten.

￿Rotate the blade by hand to make sure it is turning freely.

￿Check the riving knife and adjust if needed (see next procedure).

￿Lower the blade, insert the throat plate, then securely tighten the throat plate screw.

BLADE

THROATGUARD

PLATE

-

+

 

BEVEL

BEVEL

LOCKING LEVER

 

HANDLE

Fig. 20

 

NOTE: PLACE BLADE BETWEEN

INNER AND OUTER BLADE WASHER

SMALL HEX

LARGE HEX WRENCH

WRENCH SMALL

SPACER

TO

LOOSENARBOR

 

 

 

 

 

LARGE

 

 

 

 

 

SPACER

 

 

 

 

 

INNER

 

 

 

 

 

BLADE WASHER

 

 

 

 

 

OUTER

 

 

 

TO BLADE WASHER

 

 

TIGHTEN

ARBOR NUT

 

 

Fig. 21

 

 

 

 

 

 

TO ANGLE BLADE,

 

 

TO LOWER BLADE, PUSH BEVEL

PUSH BEVEL LOCKING

 

 

LOCKING LEVER LEFT AND

LEVER RIGHT AND ROTATE

 

 

ROTATE BLADE ADJUSTING

BEVEL HANDLE

 

 

HANDLE CLOCKWISE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

45

30

TO LOCK BLADE ANGLE,

PUSH BEVEL LOCKING

LEVER LEFT

Page 22

TO RAISE BLADE, PUSH BEVEL LOCKING LEVER LEFT AND ROTATE BLADE ADJUSTING HANDLE COUNTERCLOCKWISE

Fig. 22

Page 21 Page 23
Page 22
Image 22
Ryobi Table Saw manual To Remove the Blade, Blade Throatguard Plate, Push Bevel Locking Locking Lever Left
Page 21 Page 23

Table Saw specifications

The Ryobi Table Saw is a powerful and versatile tool designed for both hobbyists and professional woodworkers. Known for its durability and efficiency, this table saw is an essential addition to any workshop. One of its standout features is the high-performance motor, which typically operates at 15 amps, delivering ample power to handle a variety of cutting tasks with ease. This ensures that it can cut through hardwood, softwood, and even plywood without bogging down.

A notable characteristic of the Ryobi Table Saw is its precision. Equipped with a robust aluminum table, the saw offers a flat, sturdy surface that promotes accurate cuts. The table is typically expansive, allowing users to work on larger materials without difficulty. With the inclusion of rack and pinion fence system, users can make quick adjustments to the blade position, ensuring that each cut is clean and precise. The fence system is user-friendly, allowing for smooth adjustments with minimal effort.

Safety is a top priority in Ryobi's design, and this is reflected in various features like the blade guard and anti-kickback pawls. The blade guard provides visibility of the cut line while protecting the user from potential injury. Additionally, the saw often includes a push stick, which helps maintain a safe distance from the blade during operation.

Another key technology found in the Ryobi Table Saw is its portability. Many models are designed to be lightweight and feature wheels, making it easy to move the saw from one location to another. This is particularly advantageous for contractors or those who have limited workshop space.

Dust collection is also an important aspect of woodworking, and the Ryobi Table Saw typically includes a built-in dust port. This enables users to connect a shop vac or dust collector, minimizing the mess and ensuring a cleaner work environment.

In summary, the Ryobi Table Saw integrates powerful performance with user-friendly features. Its precision cutting capabilities, safety mechanisms, and portability make it an excellent tool for anyone looking to tackle woodworking projects. Whether you're a seasoned professional or a DIY enthusiast, the Ryobi Table Saw can elevate your craftsmanship and improve your woodworking efficiency.