14ENGLISH
Yellow
Yellow
Green
3Set the “INTENZA+” water filter according to the measurements per- formed (see previous chapter) and indicated on the base of the filter: A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip C = very hard water – equals 4 on the test strip
4Put the “INTENZA+” water filter into the empty water tank. Press it down until it cannot move any further.
5Fill the water tank with fresh water and reinsert it into the machine.
6Dispense all the water of the tank by using the hot water function (see “Hot Water Dispensing” chapter).
7Fill the water tank again.
8Press the “
” button and scroll the pages by pressing the “
” button until the following display is shown.
9Press the “
” button to select “ON” and press the “
” button to con- firm.
10To exit, press the “
” button. The machine shows this display and is ready to brew.
The machine has been programmed to inform the user when to replace the “INTENZA+” water filter.
