Saeco Coffee Makers HD8772 user manual English, Adjusting the Beverage Cup Length

Green

Green

ENGLISH 21

Adjusting the Beverage Cup Length

The machine allows you to adjust the amount of brewed coffee according to your taste and the size of your cups.

Each time the “”, “” or “” button is pressed, the machine brews a pre-set amount of beverage. Each button may be individually programmed for a specific brew setting.

The following procedure describes how to program the “” button.

Place a cup under the dispensing spout.

Check the position of the selection lever.

Press and hold the “” button until the “MEMO” icon appears on the display, then release the button. The machine has now entered programming mode.

The machine starts brewing coffee.

Press the “” button as soon as the desired amount of coffee is reached.

Now the “” button is programmed; each time it is pressed, the machine will brew the same amount of espresso that was just programmed.

Note:

To program the other two “” or “” beverages, the same steps should be followed. You should always use the “” button to stop brewing coffee when the desired amount of coffee is reached even when you are programming the other two “”or “” beverages.