48ENGLISH
2 Remove the Automatic Milk Frother from the steam/hot water wand.
3 Remove the “INTENZA+” water filter from the water tank if it was in- stalled and replace it with the small white original one. Place the water tank back into the machine.
Yellow |
4Press the “
” button until the following display is shown.
5 Press the “
” button to start the descaling process.
Yellow
Note:
If you press the “
” button by mistake, press the “
” button to quit.
6Remove the water tank and pour in the entire contents of the descal- ing solution. Then top up the tank with fresh water up to the calc clean level.
7Place the water tank back into the machine.
8Place a large container (1.5 l) under both the steam/hot water wand and the dispensing spout.
