50ENGLISH
Green
Yellow
1
2
3
17When the water tank is empty, remove the water tank, rinse it and fill it up to the MAX level with fresh water. Place it back into the machine.
18Empty the container back and place it back under both the steam/hot water wand and the dispensing spout.
19When the amount of water needed for the rinse cycle has been com-
pletely dispensed, this icon on the side is displayed. Press the “
” button to quit the descaling cycle.
20Press the “
” button to prime the circuit.
21The machine now carries out the
22Remove and empty the container.
23Empty the drip tray and place it back.
24The descaling cycle is now complete.
25Remove the small white filter and replace the INTENZA+ water filter (if fitted) in the water tank. Reinsert the Automatic Milk Frother.
Note:
At the end of the descaling cycle, wash the brew group as described in the “Weekly cleaning of the brew group” chapter.
The rinse cycles are performed in order to have the circuit cleaned with a preset amount of water to ensure proper machine performance. If the water tank is not filled up to MAX level, the machine might require three or more cycles.
