![the Ceramic Coffee Grinder” chapter.](/images/new-backgrounds/83521/83521121x1.webp)
|
| ENGLISH 59 |
Machine actions | Causes | Solutions |
|
|
|
The machine grinds the | There is no water. | Fill the water tank and prime the |
coffee beans but no coffee |
| circuit (see "Using the Machine for |
comes out. |
| the First Time" chapter). |
(See note) | The brew group is dirty. | Clean the brew group (see "Weekly |
|
| Cleaning of the Brew Group" chap- |
|
| ter). |
The circuit is not primed.
Prime the circuit (see "Using the Machine for the First Time" chapter).
| This might occur when the ma- | Brew a few cups of coffee as |
| chine is automatically adjusting | described in the “Saeco Adapting |
| the dose. | System” chapter. |
| The dispensing spout is dirty. | Clean the dispensing spout. |
The beverage is too weak. | This might occur when the ma- | Brew a few cups of coffee as |
(See note) | chine is automatically adjusting | described in the “Saeco Adapting |
| the dose. | System” chapter. |
The beverage is brewed | The coffee grind is too fine. | Change coffee blend or adjust the |
slowly. |
| grind as explained in the “Adjusting |
(See note) |
| the Ceramic Coffee Grinder” chapter. |
| The circuit is not primed. | Prime the circuit (see "Using the |
|
| Machine for the First Time" chapter). |
The brew group is dirty.
Clean the brew group (see "Weekly Cleaning of the Brew Group" chap- ter).
Coffee leaks out of the dis- | The dispensing spout is clogged. | Clean the dispensing spout and its |
pensing spout. |
| holes. |
Milk does not froth. | The Automatic Milk Frother is in- | Leave the Automatic Milk Frother to |
| serted too deep. No milk is being | cool down. Move it slightly down- |
| suctioned. | wards. Reposition it in its correct |
|
| seat. |
Frothed milk is too cold. | The cups are cold. | Preheat the cups with hot water. |
Note:
*These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a