Saeco Coffee Makers HD8836, HD8837 manual Control Panel Display, Ready Signals, Warning Signals

Models: HD8837 HD8836

1 28
Download 28 pages 63.98 Kb
Page 24
Image 24
Green

Green

Green

Green

Green

Green

Green

Green

Green

Green

CONTROL PANEL

DISPLAY

Ready Signals

The machine is ready for whole bean coffee brewing and hot water dispensing.

The machine is ready for pre-ground coffee brewing.

The machine is in the steam dispensing phase.

The machine is in the hot water dispensing phase.

The machine is brewing 1 espresso coffee.

The machine is brewing 1 long coffee.

The machine is brewing 2 espresso coffees.

The machine is brewing 2 long coffees.

The machine is programming the amount of coffee to be brewed.

Orange

Orange

Orange

Orange

Orange

Orange

Orange

Warning Signals

The machine is warming up to brew coffee and dispense hot water or steam.

The machine is performing the rinse cycle.

Wait until the machine automatically stops brewing the beverage.

The machine must be descaled.

The brew group is being reset due to machi- ne reset.

The coffee bean hopper needs to be refi lled with coff ee beans to restart the brewing cycle.

The Intenza fi lter must be replaced with a new one.

This message will only be dis- played if the function is activated

in the programming mode.

The alarm is deactivated only if it is “RE- SET” in the programming mode.

• 24 •

Page 24
Image 24
Saeco Coffee Makers HD8836, HD8837 manual Control Panel Display, Ready Signals, Warning Signals, in the programming mode