Saeco Coffee Makers HD8836 Enter the “menu”, Programming commands, Exit programming mode

Black

PROGRAMMING

The user can change some of the ma- chine operating parameters to suit his/ her needs.

Enter the “menu”

The programming menu can only be ac- cessed when the machine is in “stand-by” mode.

To change the machine status to stand-by mode, press the ON/OFF button.

When the machine is in stand-by mode, press the ““button to access pro- gramming.

Programming commands

Changes can be made on each page:

Orange

- The “” and “ “ buttons allow you to change the value of the function, among those appearing on the page.

- The ““ button allows you to scroll the functions and to store the changes that were made.

The fi rst page that is displayed is shown here.

Orange

	Note: Changes can be stored
	only after the displayed value
	is changed; when the displayed
Orange	value is changed the “OK” message
	appears.
	- The“ON/OFF”button allows you to exit
	the change or programming mode.

	Exit programming mode
	To exit the programming mode, press the
	ON/OFF button until the stand-by page is
	displayed.
	Note: The machine will exit
	the programming mode if
	the user does not do anything for
	30 seconds. The settings that were
	changed but not confirmed will not
Black	be stored.

• 22 •