Using the machine for the first time or after a long period of inactivity.
These simple operations will make it pos- sible to always brew excellent coffee.
The following icon will be displayed.
Green
1Place a large container under the dispensing spout.
2Before starting the procedure, check that the following icon is displayed.
3 Select the pre-ground coffee function
by pressing the “ | “ button one or |
more times. |
|
Do not add the pre-ground coffee to the compartment.
Red |
9Dispense water until the no water signal is displayed, then turn the se- lector dial
10 At the end, fill the water tank again. Then the products can be brewed as described in the following sections.
Green |
The icon will appear on the display.
4Press the button to brew a long cof- fee.
5Wait until brewing is completed and empty the water tank.
6Repeat the operations from step 1 to step 5 for 3 times; then continue with step 7.
7Place a container under the steam wand (Pannarello, if supplied).
8Turn the selector dial clockwise to set it to the “”position.
Rinse/Self-Cleaning Cycle
This cycle will rinse coffee circuits with fresh water.
The cycle is carried out:
•At machine start (with cold boiler)
•After priming the water circuit (with cold boiler)
•During the stand-by mode (if a coffee product has been brewed)
•If the machine is turned off by pressing the ON/OFF button (if a coffee product has been brewed).
A small amount of water will be dis- pensed to rinse and heat all the machine components; in this phase this icon is displayed:
Orange
Wait for the cycle to fi nish automatically.
You can stop dispensing as well, by pressing either coffee button and/or the ON/OFF button.
• 9 •