18CLEANING AND MAINTENANCE
CLEANING THE BREW GROUP
1
The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the coffee grounds drawer as shown in fi g. 4 on page 17. Once you have washed and inserted the Brew Group, insert the grounds drawer and close the service door.
2 | 3 |
Press the “PUSH” button to remove the Brew Group.
Wash the Brew Group with running water. Wash fi lters carefully.
Make sure the Brew Group is in rest position; the two references must match.
4
5
6
Make sure the components are in the correct position.
The hook shown must be in the correct position; to check its position, fi rmly press the “PUSH” button.
The lever on the rear part of the group must be in contact with the brew group base.
Insert the washed and dried Brew Group.
DO NOT PRESS THE “PUSH” BUTTON.
7
Insert the grounds drawer and close the service door.
